The Autel MaxiSys MS906BT is a powerful diagnostic scanner that can also perform key programming on a wide range of vehicles. This guide will walk you through the process of programming keys using the MS906BT, providing clear instructions and helpful tips along the way.
Autel MaxiSys MS906BT Key Programming
Understanding the Autel MaxiSys MS906BT’s Key Programming Capabilities
Before diving into the how-to, it’s crucial to understand what the MS906BT can and can’t do when it comes to key programming. This scanner excels at:
- Reading and erasing key codes: The MS906BT can retrieve existing key codes from a vehicle’s immobilizer system and erase old or unused keys, ensuring only programmed keys can start the engine.
- Programming new keys and remotes: Whether you’ve lost your keys or need an extra set, the MS906BT allows you to program new keys and remotes, syncing them with your car’s immobilizer.
- Performing immobilizer functions: Beyond keys, the MS906BT can interact with the vehicle’s immobilizer system for tasks like resetting it after a battery replacement or recovering lost key codes.
However, it’s important to note:
- Vehicle Coverage: While the MS906BT supports a vast range of makes and models, it’s essential to check Autel’s website or use the scanner’s built-in VIN lookup to confirm compatibility with your specific vehicle before attempting key programming.
- Software Updates: Keep your MS906BT’s software up-to-date to ensure access to the latest key programming protocols and features.
A Step-by-Step Guide to Autel Maxisys MS906BT Key Programming
Programming keys with the Autel MS906BT is generally straightforward, but requires attention to detail. Here’s a generalized guide, though specific steps might vary slightly based on the vehicle make and model:
-
Gather Your Materials: Before you begin, ensure you have your Autel MS906BT, the vehicle you intend to program, all existing keys, the new blank key(s) you want to program, and your vehicle’s owner’s manual.
-
Connect and Power Up: Connect the MS906BT to your vehicle’s OBD-II port, typically located under the dashboard on the driver’s side. Turn the ignition on, but do not start the engine.
-
Access Key Programming Function: On the MS906BT, navigate to the “Diagnostics” menu, select your vehicle make and model, and then choose “Immo/Key.”
-
Select Key Programming Option: You will be presented with various options related to keys and immobilizers. Choose the option specific to programming new keys.
-
Follow On-Screen Instructions: The MS906BT will guide you through the remaining steps, which may include:
- Entering Security Codes: Be prepared to enter your vehicle’s PIN code or other security information. This data is often found in the owner’s manual or may require contacting your vehicle manufacturer.
- Positioning Keys: The scanner might prompt you to place the existing key in the ignition or hold the new key in a specific location for programming.
- Waiting for Confirmation: Be patient and allow the programming process to complete. The MS906BT will indicate when the new key is successfully programmed.
-
Verify Programming: Once the process is complete, test the newly programmed key(s) to ensure they start the vehicle and operate the locks and other key-related functions correctly.
Common Issues and Troubleshooting Tips
While the Autel MS906BT is user-friendly, encountering issues during key programming is possible. Here are some common problems and how to address them:
- Communication Errors: If the scanner can’t establish communication with the vehicle, double-check the OBD-II connection, ensure the ignition is on, and try restarting both the scanner and the vehicle.
- Incorrect Security Codes: Entering the wrong PIN code or security information will halt the programming process. Carefully verify all codes entered with your owner’s manual or the vehicle manufacturer.
- Key Programming Failure: If the MS906BT indicates a programming failure, ensure you are using the correct blank key compatible with your vehicle model and try repeating the programming steps from the beginning.
Autel MaxiSys MS906BT: A Valuable Tool for Key Programming
Mastering the Autel MaxiSys MS906BT’s key programming capabilities can save you time and money, providing a convenient way to program keys yourself. Always refer to your specific vehicle’s instructions and prioritize safety throughout the process.
Frequently Asked Questions (FAQ)
Q1: Can I program a used key with the Autel MS906BT?
In most cases, the MS906BT will only program new, blank keys that have not been previously programmed to another vehicle.
Q2: What should I do if I encounter an error code during key programming?
Refer to the Autel MS906BT’s user manual or contact Autel’s customer support for assistance in interpreting and resolving error codes.
Q3: Can I update the MS906BT’s software myself?
Yes, Autel provides regular software updates that can be downloaded and installed onto the scanner using a computer with an internet connection.
Need Further Assistance?
Contact us on WhatsApp: +1(641)206-8880, Email: [email protected] or visit us at 276 Reock St, City of Orange, NJ 07050, United States. Our customer service team is available 24/7 to assist you.
Explore more informative articles on Autel diagnostic tools and key programming techniques on our website:
Let us be your trusted source for all your automotive diagnostic needs!
